Acrylink G™
Roof Coating
CROSSLINKING ACRYLIC LATEX ELASTOMER
Utilizing CROSSLINKING chemistry and custom-engineered acrylic resins,
Acrylink G™ exhibits a combination of high tensile strength and elongation previously found only in some urethane coatings, while retaining the superior ultraviolet resistance and ease of application of acrylic coatings.
In addition to high tensile strength and elongation, the cured
Acrylink G™ membrane has excellent resistance to ponding water, fire, and harsh chemical environments, including acids, bases, industrial pollutants, and hydrocarbons, such as petrochemicals and animal fats.
Technologically advanced crosslinking acrylic resins, a superior coating formulation, and competitive pricing combine to set
Acrylink G™ apart from all other coatings of any price range. With warranted applications
available over nearly every type of commercial and industrial exterior surface,
Acrylink G™ is as versatile as it is durable.
Click here for an
Acrylink G™
brochure.
|
Acrycaulkä
Brushable Grade Sealant
ACRYLIC LATEX ELASTOMER
ACRYCAULK™ is an all-purpose sealant that readily adheres to primed or painted metal, thermoplastics, asphalt, polyurethane foam, and concrete substrates. Its highly thixotropic quality and elevated viscosity enable it to bridge gaps very well, making it an ideal sealant for difficult waterproofing problems.
To bridge wider gaps,
ACRYCAULK™
can be used in conjunction with non-woven polyester roofing cloth. Applied by brush, trowel, or knife,
ACRYCAULK™ dries for recoat within 24 hours and application tools clean with water. Apply only to clean, dry substrates at temperatures in excess of 45°F. Do not use when rain is imminent. Cured
ACRYCAULK
™ has excellent resistance to hydrocarbon environments, acids, bases, and industrial pollutants.
|
Isophosä
Phosphating Solution
RUST REDUCER AND PASSIVATOR
ISOPHOS™ is a dilute solution of phosphoric acid which, on steel surfaces, reduces and helps remove rust leaving an iron phosphate surface. On galvanized steel,
ISOPHOS™
leaves a zinc phosphate surface. In both cases,
ISOPHOS™ prepares a surface to which paint or coatings will readily adhere.
ISOPHOS™ can be used at package strength or diluted up to 1:1 with water. It can be applied by brush, mop, or low pressure hand pump sprayer. Rusted areas should be kept wet with
ISOPHOS™ until the red color turns gray. The surface should then be water rinsed and allowed to dry prior to coating.
ISOPHOS™ will not damage plants, but may slightly etch concrete surfaces. As with any acidic solution, care must be exercised in the application of this product. See
Material Safety Data Sheet
for personal protection.
|
|
Isoprimeä
Primer for Metal
WATERBORNE CORROSION INHIBITING PRIMER
ISOPRIME™
is a high quality water reducible corrosion inhibiting primer for metal or
passivated rusty substrates.
ISOPRIME™ has excellent adhesion to most metal and clean painted surfaces and can be applied by brush or airless spray using a 0.013" to 0.025" tip. Surface should be prepared by removing scale and passivating with ISOPHOS™ or other phosphating solution.
|
Isocleanä
Cleaner
for EPDM & Other Single-Ply Membranes
ISOCLEAN™
is a waterborne, high performance cleaner for hard-to-clean single-ply roof
surfaces, such as weathered black EPDM. The proprietary formulation
removes degraded surface rubber, making pressure washing much more
effective, and thereby reducing labor necessary to prepare the roof surface
for waterproofing with
Acrylink G™.
Click here for an
ISOCLEAN™
brochure.
|
Roofing
Fabric
IPC's
Roofing Fabric is a Polyester non-woven roofing fabric
typically used in an Acrylink G Metal Roofing System and is available in a
4" x 360' roll.
Bulk Caulk Gun
IPC's
Bulk Caulk Gun is available with a 1 quart capacity and
special elongated delivery tube which enables the delivery of caulk from a
standing position.
|
